Danby DKC646BLS Manuale del Proprietario Scaricare il pdf (Pagina 15)

TAMAÑOS DE

BARRILES

Puede usar tres (3) tamaños estándar de barriles de cerveza

en su barril refrigerador:

1/2 Tonel: Barril de 58.5 litros (15,5 galones)

Rendimiento: 7 paquetes (1984 onzas) de cerveza

Peso del Barril: 170 libras lleno (aproximadamente)

1/4 Tonel: Barril de 30 litros (7,75 galones)

Rendimiento: 3-1/2 paquetes (992 onzas) de cerveza

Peso del Barril: 85 libras lleno (aproximadamente)

1/6 Tonel: Barril de 20 litros (5 galones)

Rendimiento: 2-1/2 paquetes (640 onzas) de cerveza

Peso del Barril: 60 libras lleno (aproximadamente)

CARACTERÍSTICAS

CILINDRO

DE CO

Un cilindro de CO

completamente cargado le brindará

(aproximadamente):

Cantidad

Tamaño del Barril

10 Barril de 58.5 litros (1/2 galón)

20 Barril de 30 litros (1/2 galón)

25 Barril de 20 litros (1/6 galón)

Para encontrar un proveedor de CO

en su área (rellenado),

fíjese en las "Páginas Amarillas" de la guía telefónica bajo

proveedores de "OXIGENO".

1. Close the main cylinder valve (A) by turning in a

clockwise direction. See Fig.12

2. Close the secondary shut-off valve (C) by

turning to "horizontal" (east/west) position on

lower stem pipe. See Fig.12

3. Remove the air line clamp and hose from the

regulator.

4. Remove the regulator assembly (E) from empty

cylinder. See Fig.12

5. Remove dust cap from new and/or replacement

cylinder

6. Re-attach regulator assembly (E) to

new/replacement cylinder. See Fig.12

7. Re-attach the air line hose to regulator (barb

connection) and secure with clamp.

8. Slowly open main valve (A) all the way.

See Fig. 12

9. Readjust regulator pressure (D) (if necessary)

between 10 ~ 12 psi/lbs.

10. Open the secondary shut-off valve (C)by turning

to "vertical" (north/south) position on lower stem

pipe.

Fig. 12

OPERATING INSTRUCTIONS

Replace an Empty

Cylinder

Tap a Keg

IMPORTANT: Do not agitate

kegs unnecessarily. If any

agitation occurs (during

transportation or installa-

tion) allow keg to settle for

1 ~ 2 hours before tapping.

• Prior to tapping the keg, ensure the beer faucet is in

the off position.

• Completely remove the dust cover (identification cap)

from the beer keg.

• Check that the keg coupler (handle) is in the up (off)

position. See Fig. 6

• Insert the keg coupler into the locking neck of the beer

keg and apply a turn clockwise to lock into position.

• Pull keg coupler handle out and downward until it locks

into position. See Fig. 7 This activates both the beer and

(CO

) pressure line.

The keg is now tapped and ready to draw beer.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Commenti su questo manuale

Nessun commento

Danby DKC646BLS Manuale del Proprietario Pagina 15

Commenti su questo manuale